Remove portable pump, hoses, nozzles from pump house.
- Place the pump by the waters edge on safe ground.
- Remove water fill cap.
- Fill pump end with water.
- Replace water fill cap and hand tighten.
- Put hard suction in water pump side of pump.
- Connect fire hose and nozzle to the pump.
- Secondary person/ hose handler holds fire hose and nozzle for safety.
- Push gas level towards engine (to turn gas on).
- Push choke lever towards the engine (to turn choke on)
- Push throttle lever half way toward engine.
- Turn red (on/off) switch to on position.
- Pull cord until engine starts.
- Slowly move choke lever back.
- Ensure secondary person/ hose handler is prepared for water.
- Push throttle lever towards engine to flow more water.
- To stop fire pump push the throttle lever all the way away from the engine and turn the switch off.
- Ensure gas is also turned off before putting pump away.